Avago-technologies SAS 9300-8i Host Bus Adapter Manual de usuario descargar pdf (Pagina 6)

Avago Technologies

- 6 -

LSI SAS 9300-8e PCI Express to 12Gb/s SAS Host Bus Adapter User Guide

September 2014

LSI SAS 9300-8e HBA Characteristics

SATA+SAS Connector (J6). The LSI 12Gb/s SAS HBA supports SATA and SAS connectors through connectors that are

SFF-8644 mini-SAS HD, external connectors.

5.4 Physical Characteristics

The LSI 12Gb/s SAS HBA is a 6.6-in. × 2.7-in., low-profile board. The component height on the top and bottom of the

LSI 12Gb/s SAS HBA is in accordance with the PCIe specification. The following figure shows the HBA board layout.

Figure 1 LSI SAS 9300-8e HBA Board Layout



EC1 – PCIe x8 board edge connector



CR1 – Heartbeat LED



J6 – SFF-8644 mini-SAS HD, external, right-angle connectors

5.5 Electrical Characteristics

The power requirements for the LSI SAS 9300-8e HBA under normal operation are as follows:



PCIe 12.0 V = 1.07 A



Power Values

—

Nominal = 14.5 W

—

Worst Case = 22.5 W

5.6 Thermal and Atmospheric Limits

The atmospheric limits for the LSI 12Gb/s SAS HBA are as follows:



Temperature range: 0 °C to 55 °C (32 °F to 131 °F) (dry bulb)



Relative humidity range: 5% to 90% noncondensing



Maximum dew point temperature: 32 °C (89.6 °F)



Minimum airflow: 200 linear feet per minute at 55 °C inlet temperature

The following limits define the storage and transit environment for the LSI 12Gb/s SAS HBA:

/6,6$6

%#

?

#2

0ORT

*

0ORT

1 2 3 4 5 6 7 8 9 10

Comentarios a estos manuales

Sin comentarios

Avago-technologies SAS 9300-8i Host Bus Adapter Manual de usuario Pagina 6

Comentarios a estos manuales

Relacionado con productos y manuales para Hardware Avago-technologies SAS 9300-8i Host Bus Adapter